Looking for a Job Offshore? New Starts or experienced!
Don’t know where to start?
Struggling to find employment departments and solid contacts?
Do you know which companies are hiring right now?
Do you know which companies take on new starts?
Fed up with tired old job sites where your Resume is rarely seen?
Professional Services – Get the competitive edge.
Getting a job in the offshore oil industry is not like getting a job in any other industry. Full membership professional services are designed for this industry and they really work.
Get your job search off to the fastest possible start.
Here’s what you get:
- We send your Resume direct to the E-mail inbox of over 1200 companies, agencies, contractors, employers, recruiters and a whole lot more.
- Saving you time. Ten minutes from now your Resume will arrive at over 1200 industry recruitment addresses.
- Due to constant staff turnover and regular new contracts there are always vacancies.
- Saving you money at less than 7 cents per contact.
- Lifetime membership – once only payment – 100% guaranteed.
- At no extra charge we then continue to send you further Job Application Updates.
- You can go on using your account with us for your entire career.
- Make back the money you invest in us in your first few hours of work.
CURRICULUM VITAE
Career Objectives
To Serve humanity and render service with dignity, humility and patient. Also to work in a firm/establishment where my skills/knowledge will not only be utilized but challenged and improved.
Name: AMBIRI Emomotimi
Address: 16A Agbassa Street, Warri, Delta.
Date of Birth: 9th August 1980
State of Origin: Bayelsa
Local Govt. Area: Sagbama
Place of Birth: Warri, Delta
Nationality: Nigerian
Marital Status: Single
Mobile Number: +2348066594196, +2347086260910
E-mail: timiflex4real@yahoo.com
Educational Background
Ambrose Ali University, Ekpoma, Edo State. 2000 – 2005
G.C.E. O’ Level 1997
Uwangue College, Warri, Delta State. 1991 – 1996
Mowoe Primary School, Warri, Delta State. 1986 – 1991
Qualification/Grade
B.Sc., Business Administration, Second Class Honour (Lower Division) 2005
O’ Level Result/Certificate 1997
Primary School Leaving Testimonial/Certificate 1991
Working Experience
Employer/Address Position/Function Duration
Hogan Guards Nig. Ltd.
25, Peace Drive Street,
Off Aboluma Road,
Port Harcourt,
River State. Security Supervisor
• Supervision of assigned security personnel
• Ensuring all security protocols are observed and reporting to control department. 2006
National Youth Service Corp (NYSC)
JB Energy services Limited
31 Airport road Warri GDJSS GID-GID Jakusco Local Govt. Area, Yobe State
Logistics Manager 2008/09
2009
Special Awards/Certificates
Diploma in Computer Studies
Achievers Project Training Institute, Warri 2008
Interest
Reading
Traveling
Sports
Writing
References
Oghenekaro Ugen +2348033165917
Mobil Oil, Port Harcourt, River State, Nigeria.
David Titus +2348032003509
MTN, Lagos State, Nigeria.
sir i request plz search my job i m 2year experience for geophysics
25th July 2009
To :
Human Resources Department
Oil & Gas Company
Dear Sir/ Madam,
I am writing in conjunction with the opening position of job as related with my current background in your company. I am herewith completely interested in applying that position as any position
Afterwards let me acquaiant a bit of myself.
For experience, I have been working at PT. Saint Gobain Abrasive Indonesia as Application Engineering, also have worked at PT. Saint Gobain Winter Diamas as Sales Engineer, at PT. LG Philips Display Indonesia as Design Engineering and at PT. Matsushita Toshiba Picture Indonesia as Engineer on Manufacturing Engineering Department concerned Customer (Business Application) and Product Development.
I am a holder of Electrical Engineering Degree (power), graduated from Electronic Engineering Polytechnic Institute of Surabaya – PENS ITS (Diploma) and Krisnadwipayana University of Jakarta (Bachelor) with very good predicate.
I am presently possess good communication, skills, excellence command of written and spoken English. Also can work as independent by minimum supervise and team.
To face global competition and upcoming challenge, now I am looking forward to joint a reputable and global-oriented company, which could provide conductive working atmosphere and prospective career as well. If you are seeking a potential, dependable and highly self-motivated candidate, kindly please contact me at the above address.
At a time convenient for you it would be an honor for me to have further selection as to my qualification for a beginning career in your company.
Sincerely Yours,
(Erwien Wilaksono)
ERWIEN WILAKSONO
Born/ Date : Surabaya, 7th January 1975
Address : Jl. Cipinang Latihan No. 23
RT 12/ RW 13, Kel. Cipinang Besar Utara
13410 – Jakarta Timur
E-mail : wilaksono.erwien1@yahoo.com
Mobile no. : 0819 – 05363278
CAREER OBJECTIVE
To find a challenging position to meet my competencies, capabilities, skills, education, and experience to your company.
PROFESSIONAL EXPERIENCE
April 2009 – : Application Engineer for Bonded and Thin Wheel product
PRESENT at PT. Saint Gobain Abrasives Indonesia
Job Group: Product & Marketing Department
Domestic Customer
To support customer/ distributor for product, application, complaints, follow up, and training
Collect data to customer for product application.
Describe information & knowledge of the product to customer.
Monitor product selling report depend on planning & target.
To back up Sales Engineer team in relation with product & application.
As consultant to supervise product application to customer & distributor.
To do trial product and complaint investigation.
April 2008 – : Sales Engineer for Diamond/ CBN Wheel product
April 2009 at PT. Saint Gobain Winter Diamas
Job Group: Sales & Marketing Department
Domestic Customer Service
Receiving enquiries from domestic customer
Preparing drawing (coordinating with construction dept.)
Preparing pricing (coordinating with finance dept.)
Sending quotation to customer
Folllow up the production (for any delays or reject items)
Correspondence to the customer to keep relationship for any enquiries, complaint, respons, etc.
December 2007 – : Design Engineer for Colour Picture Tube (all size)
February 2007 at PT. LG Philips Displays Indonesia
Job Group: Design Engineering Department
Customer & Product Development
Customer support for continue approach and technical countermeasure matter.
Design & Product quality: reduce reject rate claim from customer and action of claim.
Improve quality product and process concern : design part, index up, saving of energy, green procurement system. promoting and executing ISO 14001
Improve and approval material : reduce material consumption, new part/material evaluation and approval
October 2005 – : Manufacturing Engineer for Colour Picture Tube (all size)
October 2007 at PT. Matsushita Toshiba Display Devices Indonesia
Job Group: Manufacturing Engineering Department
Customer Concern
New customer application.
Customer support for continue approach and technical countermeasure matter.
Product quality: reduce reject rate claim from customer and action of claim.
Documentation: contract specification related with technical document.
Customer requirement: bogie sample product preparation, technical document and approval.
Product Development Concern
Improve quality product and process concern : design part, index up, saving of energy, green procurement system, promoting and executing ISO 14001
Improve and approval material : reduce material consumption, new part/material evaluation and approval.
Standard Operational Procedure (Engineering Instruction and Working Instruction)
Manufacturing condition
Quality control system on process.
Inspection method condition.
Material consumption
April 2005 – : Acting Engineer for Colour Picture Tube (all size)
October 2005 at PT. Matsushita Toshiba Display Devices Indonesia
Job Group: Manufacturing Engineering Department
Planning & implementing of new part/ material application
to product execution.
Maintain, improving, & extending product quality yield.
Conducting internal training for all technician & operator.
Conducting service mainly quality level of product.
Coordinating technical training & technical support to all market in the world for CPT product, test & system.
New Design product development & improvement
Maintain & Control Document (administration)
Gathering & analysis data of process condition.
Product assembly & sample specialist
March 1999 – : Senior Technician for Colour Picture Tube (all size)
May 2005 at PT. Toshiba Display Devices Indonesia
Job Group: Manufacturing Engineering Department
Engineering report application
Customer sample application demand
Support & leading of quality control for manufacturing & quality assurance departement.
Design product engineering
December 1997- : Technician for Colour Picture Tube (all size)
February 1999 at PT. Tosummit Electronics Devices Indonesia
Job Group: Manufacturing Engineering Department
Introduction process flow function
Conducting system operational procedure.
Engineering instruction, working instruction application
Technical support for domestic customer.
Sample application demand from customer.
COMPANY PROJECT EXPERIENCE
Planning, monitoring, start-up of exploration and exploitation at PT. PLN project (PLTG-PLTGU Grati Pasuruan) Proyek Induk Pembangkit dan Jaringan Jawa Timur dan Nusa Tenggara.
Startup, presentation of bonded wheel as applicated on roll grinding machine (cold rolling mill) at PT. Jindal Stainless Steel Indonesia.
Safety training socialization of Flexovit thin wheel at South East Asia Pipeline Industry, PT. Bakrie Pipeline, Lampung
Startup, Trial of Epoxy bonded wheel at playwood & veneer company at PT. Sumber Graha Sejahtera, Cilegon
Startup, commissioning and trial of Ferroline thin wheel at Kapuk and Glodok retail workshop.
Presentation and trial of diamond/ CBN wheel product at PT. AHM.
Safety training and trial of diamond / CBN wheel product on paperline industry, PT. Pindodeli and PT. Tjiwi Kimia
Technical assignment and handling complaint product of CPT on TV production line at Sharp Roxy Johor Malaysia
Technical assignment, problem solving of complaints on Sanyo TV company at Telebalt, Kaliningrad, Leningrad Russia
Handle technical assignment on TV production line at Toshiba Singapore Pte., Ltd. Singapore.
Startup, control, technical handling of all domestic TV brand in Indonesia (Sony, Panasonic, Toshiba, Sharp, Sanyo, Polytron, Akari, Sanken, JVC).
EDUCATION
Electronic Engineering Polytechnic Insitute of Surabaya – Insitute Teknologi Sepuluh Nopember (ITS) Surabaya with predicate very satisfied.
1994 – 1998 : Electrical Engineering Diploma Degree
By final project : “DC-DC Converter as Field Regulator in DC Motor”
University of Krisnadwipayana Jakarta with predicate satisfied.
1998 – 2001 : Electrical Engineering Bachelor Degree
By final project : “Analization of Arcing Phenomenon on 14” Television at PT. Toshiba Display Devices Indonesia”
ACHIEVEMENTS
1994, 1995, 1996 : Education achievement from JIEFF scholarship from JICA (Japan’s study council)
1997 : PPA (Pendidikan dan Prestasi Akademik) Scholarship, education achievement from Indonesia government.
Purity (Landing) Improvement of 14” Toshiba CPT by,
– Reducing customer claim from JVC regarding to purity problem from reject rate 22.04% to 0.41%.
– Keeping good landing performance by method “ Turn Lens -3,60o right of BC Exposure.
Cost down project of 14” LG Micron of flat mask.
– Keeping good potential price of flat mask from $1.027/ pcs (Xinzhi) to $0.95/ pcs (LG Micron)
– Increasing good quality of screen of new flat mask as alternative supplier.
Cost down project of 21” I-ARC of Deflection Yoke (DY)
– Decreasing material price of current DY ($ 4.50/pcs) to the new DY
($ 3.84/pcs).
– Stabilize performance level of new DY including dimension & quality.
Reducing defect rate of all size Toshiba CPT due to silicon coating peel off problem at Funai Malaysia until 50% during April until June 2004.
TRAINING AND COURSES
PT. PLN, Field Job Training
1996 : Proyek Induk Pembangkit dan Jaringan Tenaga Listrik Jawa Timur dan Nusa Tenggara, Proyek PLTGU Grati – Pasuruan
MT & A Baliridi Consulting Jakarta by JICA , In House Training
2000 : 5S Plus (Seiri, Seiso, Seiton, Seiketsu, Shitsuke) Indonesia-Japan Work Ethics and Corporate Culture, held at PT. Toshiba Display Devices Indonesia
Six Sigma Methodology (DMAIC/ PDCAC) Training
2002 : held in PT. Matsushita Toshiba Picture Display Indonesia
ISO 14001: version 2004 Auditor Training from Sintegral Consulting
2007 : held in PT. Matsushita Toshiba Picture Display Indonesia
Green Procurement (RoHS) Training System.
21st~22nd June 2007 : held in PT. Sharp Electronics Indonesia (SEID)
March 2006: 7 Habits of Highly Effective People Internal Training
1999 : English Course at IEC Bekasi, intermediate level
April 2002 : TOEFL Course held on ELS, Indonesia University with
overall score 377
19th August 2008 : Customer Relationship Management for building customer
intimacy and long term relationship held by PQM (Productivity & Quality Management Consultants)
24th October 2008 : Smart Selling Skills Training held by C7G Training Network
15th May 2008 : Health, Safety, Environmental (HSE) Internal Training held by Saint Gobain Winter Diamas
April~June 2009 : Professional Talking English for Business Course, ILP Bekasi
April 2009 : Clifford Change, Saint Gobain Comply Test.
LANGUAGES
Indonesia
Japanese : Basics
English : Oral and Written
QUALIFICATION & SKILLS
Strong leadership, management skill, and able to coordinate alsi supervise the team
Have high personality, initiative, mental, and health
High responsibities, trustworthy, can work independently witk minimum supervision
Able to handle pressure, multiple task, and meet deadlines.
Good commitment, proactive, self motivated, fast learner,customer and result oriented, and also mature.
Good understanding of process, engineering drawing, schematic, specification, and test methods.
Knowledge in maintenance, repair, setup, usage and technical equipment.
Competence in use of basic hand tools, power tools and measurement devices.
Have good commant both written and oral English.
Computer Literature : Microsoft Office (Word, Excel, Powerpoint), Minitab, Photoshop
Basic of Auto CAD applications
Familiar with Six Sigma Methodology (DMAIC)
Internal Auditor of ISO 14001
Internet & E-mail by Lotus Notes
SAP Programme
Full driving licence certificate (SIM C & A)
REASON FOR LEAVING
“Company crisis due to the worldwide of global crisis and tightened competition”
CURRENT/ RECENT SALARY
– Gross Income Range : IDR 4.000.000,- ~ IDR 5.000.000,-
– Transportation Additional
– Medical Additional (Insurance)
– Intensive and Bonus
I am a 400l petroleum student, I am looking for an industrial training space for a period of 6 months. thanks in anticipation.
A
Mehdi Asadi Niazi
Piping Engineer
Add.: No. 3, Shafagh Street, Dadman Avenue, Phase 7,
Shahrak Ghods, P.O Box 14665 / 495, Tehran 1466956491 , Islamic Republic of Iran
Office,Iran Marine Industrial Company (Sadra), 4st Floor,Tel:88575867 Ext. 1853
Tel: (+98 21) 44609176 Mob: (+98 ) 912 7390673 E-mail: m.asadiniazi@gmail.com
PERSONAL INFORMATION
Full Name: Mehdi Asadi Niazi
Nationality: Iranian
Marital Status: Single
Date of Birth: 1980
Place of Birth: Ardabil, Iran
EDUCATION & AWARDS
1996-2001
Bachelor of Science in hydraulic Engineering, Tabriz University,
Tabriz, Iran
2003-2006 Master of Science in hydraulic structures, science and research University,
Tehran. , Iran
Awards
Certificate of piping design with Pipenet software from Novin Parsian institute
COMPUTER KNOWLEDGE
Pipenet Steady module and transient module
Water cad (steady state analysis)
Water Gems( steady state analysis)
Epanet (steady state analysis software)
Hammer (transient and water Hammer Calculation)
PDMS (intermediate)
Hytran (transient and Water Hammer Calculation)
Microsoft Project
Microsoft Office
AutoCAD
LANGUAGES
Communication and Correspondence
• English: Competent
• Persian (Farsi): Fluent
• Turkish (Azeri): Native
QUALIFICATION SUMMARY
Based on my several years of experience in mentioned fields, my achievement is that general skills play a key role in project success. Regarding that, beside my specialty I have improved my skills in good effort, team work, communication, presentation and etc.
RESEARCHES
• Numerical analysis of Transient and Water Hammer at Pipelines.
• Study on physical & hydraulic models.
• Duckbill spillways mechanism.
• Experimental physical model study and analysis of wave propagation on
model and prototype
• Sea water pump station basin mathematical hydraulic model test (CFD
analysis)
WORK EXPERIENCE
Company: Iran Marine Industrial Co. (SADRA) Tehran, Iran
Role: EPC Contractor
Position: Piping Engineer Department: Engineering, Construction Department
Key Duties:
• Project Manager of seawater / cooling water supply & distribution project utility complex phase I including managing Engineering teams consist of IMPAC Engineering Consultant, SAZEH Engineering Consultant and SADRA Engineering team including piping, Mechanical , Electrical and Civil.
Management of procurement , engineering and construction teams.
• Detail Deign of seawater / cooling water supply & distribution project of BANDAR ABBAS Condensate refinery including Preparing Specifications , MTO’s , Piping plan and Isometric drawings with PDMS Software ,PFD and, hydraulic Calculation, transient water hammer calculation , Pipe Size Calculation , Wall thickness Calculation ,Cross Sectional drawings , Piping Classes and etc. (2008-Present).
• Basic design of seawater / cooling water supply & distribution project of BANDAR ABBAS Condensate refinery include Preparing Specifications , P&ID’s , MTO’s , Plot plans ,PFD and, hydraulic Calculation, transient water hammer calculation , Pipe Size Calculation , Wall thickness Calculation, Main Line Isometric With PDMS, Cross Sectional drawings , Piping Classes and etc. (2008).
• Detail Design of seawater / cooling water supply & distribution project of Mehr Petrochemical Company include Preparing Specifications , Steady state and transient water hammer calculation for supply line, Calculation of out fall weir, Return culvert hydraulic and size calculation, P&ID’s , PFD, Orifice Size Calculation, Longitudinal Drawing and etc. (2007-2008).
• Basic design of seawater / cooling water supply & distribution project utility complex phase II – assaluyeh for SADRA with AWWA, ASME B31.1, B31.3. (2007). Preparing P&ID drawings, MTO’s, Plot plans, PFD, hydraulic calculation, Isometric drawings and other documents and procedures for this project. (2007-2008).
Company: ParsabTadbir consulting engineering (PAT) Tehran, Iran
Role: Engineering Consultant Project: Abali Drinking Water Supply project
Position: Senior Piping Engineer Department: Engineering Department
Key Duties:
• Basic Design of Water Supply And Distribution of Abali Drinking Water Supply project include
Preparing Pipe Size Calculation, Cross sectional drawings, P&ID’s , PFD, Hydraulic
Calculation, Wall Thickness Calculation and etc.(2006)
• Detail Design of Water Supply And Distribution of Abali Drinking Water Supply project include Preparing Pipe Size Calculation , Cross sectional drawings, P&ID’s , PFD, Hydraulic Calculation(with Water Gems Soft Ware) , Transien and Water Hammer Calculation(Hammer Software) ,Wall Thickness Calculation and other documents and procedures for this project.(2006-2007)
• Transient and water Hammer analysis for Tehran Water and sewage Project (2007)
• Transient and water Hammer analysis for Mahmood Abad Project .(2007)
• Transient and water Hammer analysis for Shams Abad water supply project.(2007).
Company: Saz Ab Shafag consulting engineering (PAT) Tehran, Iran
Role: Engineering Consultant Project: Talegan Pump Station and Pipeline
Position: Senior Piping Engineer Department: Engineering Department
Key Duties:
• Steady State and Transient and water Hammer analysis for Talegan Pump Station Project (2006)